Get 5G Service on Your 4G Phone: Page 2


To understand how such a system would work, let’s start with the basic set-up. To deploy the technology, an operator would first need a cloud-based data center -- a rack or many racks of connected servers that would do all the heavy computation for the system. The operator would then need to install radio antennas where its customers are located, such as in homes, businesses and city streets.

Although these access points might look like small cells, they’re unlike ordinary base stations. “They’re dumb devices,” Perlman says, serving merely as waypoints for relaying and deciphering signals. Each one could be placed anywhere that’s convenient and would link back to the data center through a fiber or wireless line-of-site Internet connection.

Smart Trench Coat Has 4G, Wireless Charging

People sometimes use "props" to spice up their sex lives, but a new study shows that nearly 1 in 10 actually use their smartphones when having sex! Anthony and Cristen Conger, from "Stuff Mom Never Told You," investigate.

Now suppose that your phone wants to connect with this pCell network. It would simply send out an access request as it normally does. And all of the “dumb” antennas in your vicinity -- let’s say there are 10 of them -- would pick up those signals and relay them to the data center.

That’s where things get interesting. Say, for example, you play a YouTube video. The pCell data center would request the video from Google’s servers, and then stream it to your phone through those 10 antennas. But here’s the key innovation: No one antenna would send the complete stream or even part of the stream. Instead, the data center would use the positions of the antennas and the channel characteristics of the system, such as multipath and fading, to calculate 10 unique waveforms, each transmitted by a different antenna. Although illegible when they leave the antennas, these waveforms would add up to the desired signal at your phone, exploiting interference rather than trying to avoid it.

And as you move about, and as other devices connect to and drop off the network, the data center would continuously recalculate new waveforms so that each device receives the correct aggregate signal. “There’s no handoffs and one has to take turns,” Perlman says. “You could literally light up a whole city using all the same spectrum.”

If pCell technology does take off in the next few years, it will likely be because it’s compatible with 4G LTE phones. It does this by simulating LTE base stations in software. The data center would use these virtual radios to inform its waveform calculations, essentially tricking an LTE phone into believing it’s connected to a physical base station. “Your phone thinks its the only phone in the cell and is sitting right next to the tower,” Perlman says. The same technique could also work for other wireless standards, such as 3G and Wi-Fi, he says.

Software Makes Internet Up To Three Times Faster

So will operators adopt pCell? It’s unlikely that LTE carriers would replace their networks any time soon, even if Artemis’s technology proves to be the “seed change” Perelman believes it is. But its compatibility with LTE changes the game. For instance, operators could deploy pCell antennas in congested hot spots such as airports, sports stadiums, and city centers -- places where they’re already investing in new infrastructure. Users could roam seamlessly between the two networks without having to buy new phones or switch service plans.

Artemis says it plans to license pCell to wireless carriers and Internet service providers. The company is now beginning large-scale trials in San Francisco and expects the technology will be ready for commercial rollouts by the end of 2014. It will be fascinating to see how its ambitions pan out.

Get more from IEEE Spectrum

This article originally appeared on IEEE Spectrum, all rights reserved.

Invalid Email